Installation, explained
Toilet installation in Alliston: choosing the right toilet, what the job involves, and what changes the price
A new toilet is one of the few plumbing jobs that improves the bathroom every single day: a better flush, less water, a quieter tank and a height that suits the people using it. Here is how we help you choose one in Alliston, what a proper installation includes, the upgrades people ask about, and what moves the price up or down.
Which toilet? The choices that matter
- Rough-in. The distance from the wall to the centre of the floor drain, usually 12 inches, sometimes 10 or 14 in older homes. Measure before you buy; the wrong rough-in will not fit, and we check it on every quote.
- Flush type. A modern single-flush toilet uses 4.8 litres against 13 or more for an old one. A dual-flush adds a half flush for liquids and cuts water use further, which matters on a well as much as on a water bill. A pressure-assist toilet is the strong flush for a home with repeat clogs.
- Height. Standard bowls sit at about 15 inches; comfort height (chair height) is 17 to 19 inches and is easier on knees, hips and backs. It is the most common upgrade we install for anyone over fifty or planning to stay in the house.
- One-piece or two-piece. One-piece toilets are easier to clean and look cleaner; two-piece cost less and are easier to carry up a staircase. Both flush the same.
- Wall-hung. A wall-hung toilet needs an in-wall carrier and tank behind the drywall, so it is a renovation job, not a swap. Stunning in a small bathroom, easy to clean under, and we install the carrier, the drain and the toilet as one job.
- Bowl shape. Elongated bowls are more comfortable; round-front bowls save a couple of inches in a tight powder room.
Upgrades: bidet seats, smart toilets and touchless flush
A bidet seat fits most existing toilets, needs a cold water tee at the supply and a grounded outlet nearby; we do the plumbing side and tell you if an outlet needs to be added. A smart toilet builds the heated seat, wash, dryer and night light into one unit and installs like a one-piece toilet with the same outlet requirement. A touchless flush is a sensor kit or a new tank lever that replaces the handle, popular in homes with small children or for anyone who wants fewer things to touch. A soft-close seat, a new flush button or lever, and a replacement flush valve are quick jobs we do on their own or while we are already there.
What a PHD installation includes
Water off, the old toilet drained and removed, and the floor flange inspected. The flange is the ring the toilet bolts to; a cracked, rusted or sunken flange is the reason so many “new” toilets leak at the base, so we repair or replace it before anything goes on top of it. Then a new wax ring or waxless seal, new closet bolts, the toilet set, levelled with shims if the floor is out, bolted down evenly so the porcelain cannot crack, and caulked at the base. A new braided supply line and a quarter-turn shut-off valve replace the old ones. We flush it several times, check the base and the tank bolts dry, set the tank level, and take the old toilet with us. About two hours for a straight swap, longer if the flange or the floor needs work. Work is done to the Ontario plumbing code by licensed plumbers.
Why not do it yourself?
Plenty of people do, and the ones who call us afterwards usually have one of three problems: a slow leak at the base because the flange was below the finished floor and a single wax ring could not seal it; a cracked bowl from a bolt tightened too far; or a toilet that rocks because the floor was not shimmed. A professional installation costs less than one of those repairs, comes with a plumber who can see the flange and the drain and fix them on the spot, and carries the manufacturer’s warranty on the toilet without a question about who installed it.
What changes the price
Four things: the toilet itself (we supply proven models, or install one you have bought), whether the flange or the floor around it needs repair, whether the shut-off valve and supply line need replacing (they usually do on an older toilet), and whether it is a straight swap or a wall-hung or relocated toilet that needs the drain moved. We quote it in writing before the old toilet comes out, and the weekday $45 service call is applied to the job. For a bathroom with several fixtures changing, financing through Financeit is available.
Replacing more than one?
Two or three toilets in one visit is the most economical way to do it, and it is the right time to look at the rest of the bathroom: a faucet, a shower valve, a slow drain, or the water heater that feeds it all. See toilet repair in Alliston if yours only needs a fix, bathroom renovations in Alliston for a full remodel, and water softeners in Alliston if hard water is shortening the life of every fixture in the house.