Toilets, explained
Toilet repair in Bradford: what goes wrong, what we fix, and when a new toilet is the smarter call
A toilet has fewer moving parts than almost anything else in the house, and every one of them wears out. Here is what each symptom usually means, exactly what a PHD repair involves in Bradford, how we decide between a repair and a replacement, and the questions people ask when they book.
What is inside the tank, and what fails
Open the lid and you will see four things. The fill valve refills the tank after a flush and shuts off at the set level. The flapper (or canister seal on newer toilets) sits on the flush valve and lifts to let the tank empty into the bowl. The overflow tube keeps the tank from flooding if the fill valve sticks. Under the toilet, a wax seal joins the bowl to the drain flange in the floor, and a braided supply line with a small shut-off valve feeds the tank. On the hard water most of Bradford runs on, the flapper and fill valve are the first to go, usually inside five to seven years; on well water with iron, sooner.
Symptom to cause, in one list
- Runs on and off by itself (“phantom flush”): a worn flapper letting water seep from tank to bowl. The single most common toilet call, and the most expensive to ignore: a running toilet can waste hundreds of litres a day, which shows up on a municipal water bill and runs a well pump ragged.
- Keeps running after a flush, or hisses: fill valve not shutting off, or the float set too high so water spills down the overflow tube.
- Weak or incomplete flush: low tank level, a flapper closing too early, mineral scale blocking the rim jets, or a partial clog in the trap.
- Clogs often: something lodged in the trap, a low-flow toilet from the early 2000s that never flushed well, or a drain problem past the toilet. If the tub or shower gurgles when you flush, it is the drain, not the toilet.
- Rocks, or water at the base: loose closet bolts or a failed wax seal. Water at the base after a flush is a seal that is letting sewage onto the subfloor; stop using it and call.
- Water under the tank: tank-to-bowl bolts or gasket, or a sweating tank in summer. Dripping at the wall is the supply line or the shut-off valve.
- Sewer smell: a failed wax seal, a cracked bowl, or a vent problem. A crack in the porcelain is a replacement, not a repair.
What a PHD toilet repair includes
Your plumber shuts off the supply, confirms the cause rather than guessing from the symptom, and fixes it on the spot from the truck: new flapper, fill valve or complete flush valve; the float and tank level set so the flush is full but nothing spills down the overflow; the rim jets and trap cleared of scale; the toilet lifted, the old wax removed and the bowl reset on a new seal and new closet bolts, square and solid; a new braided supply line and a quarter-turn shut-off valve if the old one is seized or weeping; and a clog cleared with a closet auger, which is shaped to protect the porcelain. Then it is flushed several times, the base and tank checked dry, and the floor cleaned. Work is done to the Ontario plumbing code, with parts that carry the manufacturer’s warranty.
Why a small leak is worth a fast call
A toilet leaks in two directions. A leak into the bowl is silent and wastes water every hour. A leak at the base goes under the flooring, where it rots the subfloor, lifts tile or vinyl, and in a second-floor bathroom stains the ceiling below. Repaired on the day you notice it, either one is a short visit. Left for a season, the base leak becomes a floor repair that costs many times the plumbing. If you can see a damp ring around the base, hear water running when nobody has flushed, or smell sewage near the toilet, that is the day to call.
Repair, or replace?
We repair far more toilets than we replace, and we will tell you which yours needs. Repair is the right call when the porcelain is sound and the problem is a flapper, fill valve, seal, bolts or a clog. Replacement is the right call when the bowl or tank is cracked, when the toilet is an original from before the mid-1990s using 13 litres or more a flush, when it is an early low-flow model that has never flushed properly, when parts for it are no longer made, or when it has needed repair twice in a year. A modern 4.8-litre toilet uses a third of the water of an old one, which matters on a well as much as on a water bill, and a comfort-height bowl is easier on knees and backs. If you are already renovating, or the toilet is the last original fixture in the bathroom, replacement usually makes more sense than another repair.
What a replacement involves
We supply and install toilets we trust, or install one you have bought. The old toilet comes out, the flange is inspected and repaired or replaced if it is cracked or below the finished floor, a new wax or waxless seal goes on, the new toilet is set, bolted and caulked, connected with a new supply line, and tested. Two hours for a straight swap. We haul the old toilet away. See toilet installation in Bradford for models and options.
Keeping a toilet out of trouble
Once a year, lift the lid: the flapper should be soft and seal flat, the water level should sit about 2 cm below the top of the overflow tube, and the tank should refill in under a minute and go quiet. Put a few drops of food colouring in the tank and wait twenty minutes; colour in the bowl means the flapper is leaking. Skip in-tank bleach tablets, which eat rubber parts; clean the bowl, not the tank. Flush only waste and toilet paper: wipes, even the ones marked flushable, are the top cause of the clogs we clear in Bradford. On hard water, a softener protects the fill valve and the rim jets along with every other fixture in the house.
Booking, pricing and payment
Call, or use the callback form on this page, and we confirm the time with you. Weekdays, the $45 service call covers the visit and the diagnosis; the repair is quoted before any work starts and the $45 is applied to the job if you go ahead. A running toilet, a clog or a base leak is usually fixed the same visit from the parts on the truck. Calls are answered 24/7, and an overflowing toilet or sewage at the base is treated as an emergency. Larger jobs, such as several toilets or a full bathroom, can be financed through Financeit.
Other plumbing on the same visit
Most toilet calls turn into a quick look at the rest of the bathroom, and we are happy to do it: a dripping faucet, a slow sink or tub, a shower valve, a water heater that is not keeping up, low pressure, or a shut-off valve that will not close. One licensed plumber, one visit, one price list. Drain cleaning in Bradford · Shut-off valves in Bradford · Water softeners in Bradford