24/7 emergency well serviceAlliston · Barrie · Innisfil
705-627-5725
Alliston · Barrie · Innisfil · Simcoe County

Weak pressure, or a pump that clicks on and off?

Low well water pressure is a symptom with about eight possible causes, and only one of them is an expensive pump. We test the whole system — switch, tank, pressure settings, flow — and fix the cause, not the complaint.

Call 705-627-5725Get a free estimate

Upfront pricing. You approve the flat price before any work starts.

  • A house with no water is treated as an emergency, day or night.
  • Free diagnosis, and a $45 service call on weekdays.
  • 10-year warranty on major parts on our maintenance program.
  • Eight trucks across the county, so someone is usually close by.
4.9 from 820+ reviews Free diagnosis 10-year warranty on major parts 8 fully stocked trucks Licensed, insured & WSIB covered 24/7 emergency service
Self-diagnose first

What does your pressure actually do?

How the pressure behaves is the diagnosis. Find yours below.

Pump clicks on and off every few seconds

Short cycling — almost always a pressure tank that has lost its air charge or split its bladder. This is the single most expensive symptom to ignore: it destroys pumps and switches.

This week

Pressure fades in the shower, then comes back

The tank’s usable drawdown is gone, so you’re running straight off the pump. Often paired with a pre-charge that’s never been set.

This week

Weak everywhere, all the time

Pressure switch set too low, a clogged sediment or iron filter, scaled-up galvanized piping, or a pump that’s lost capacity.

Scheduled

Fine downstairs, poor upstairs

A pressure problem, not a pump problem — every storey costs you roughly 4–5 psi. Usually the cut-out setting is too low for the house.

Scheduled

Gauge needle jumps and shudders

Waterlogged tank, or a failing check valve letting water fall back down the well between cycles.

Same day

No pressure after a power outage

Tripped switch, a pump that lost prime, or a control box that took a surge. Common after a Simcoe County storm.

Same day
Describe it to us — 705-627-5725
What you get either way

No surprises, in writing, before we start.

Diagnosis is free

Finding the fault costs you nothing. You get the answer whether or not you go ahead.

$45 weekday service call

That’s the whole call-out charge Monday to Friday. Evenings, nights and weekends carry a higher rate — you’re told the number before we book.

Upfront flat-rate pricing

One price for the job, agreed before the work begins. No hourly meter running while you watch.

10-year warranty on major parts

Ten years on major parts for customers on our maintenance program — plus the manufacturer’s warranty on equipment.

Scope of work

What we actually test

The five-minute diagnostic

  • Cut-in and cut-out pressure through a full cycle
  • Tank pre-charge against the switch setting
  • Drawdown volume — how much usable water you have
  • Pump amp draw under load
  • Flow rate at the pressure tank vs at the tap
  • Filters, softener bypass and valves for restriction

What the fix usually is

  • Re-charge the pressure tank and reset it properly
  • Replace a failed pressure switch or gauge
  • Replace a waterlogged or split-bladder tank
  • Raise the pressure settings to suit the house
  • Replace a leaking check valve
  • Upgrade to a constant-pressure system
Three steps

How the visit goes

We watch one full pump cycle

Before touching anything, the tech records cut-in, cut-out and how long each stage takes. That one observation rules out most of the possible causes.

You get the reading and a flat price

You see the numbers your system is actually running at, what they should be, and one price to correct it. Approve it and we go.

We leave the settings written down

Pre-charge, cut-in, cut-out, tank size. Taped to the tank, so the next person who looks at it — including you — knows what normal looks like.

4.9 from 820+ reviews

What Simcoe County well owners say

“Freddy was amazing. He took his time to carefully diagnose the problem, making sure he fully understood the issue before moving forward. His professionalism and attention to detail were clear throughout the entire process. Once he identified the root cause, he had it fixed within an hour, working efficiently without ever making us feel rushed.”
Raul Valenzuela · Google review
“I called PHD for a leak in the basement and they sent Jimmy over within an hour. While he was here he noticed a second leak and saved our sump pump from flooding the basement. Fantastic service, very friendly and quick. Would definitely recommend!”
Marley Sierakowski · Google review
“Freddie and Alex were great, explained everything to me super clearly, what the options were and finished the job super quickly.”
Dave · Google review
Service area

Where we go

Three locations across the county, eight trucks on the road, and 24/7 emergency coverage for well systems in between.

AllistonBarrieInnisfilTottenhamBeetonBradfordEverettCookstownAngusShelburneOrangevilleNew TecumsethEssaAdjala-TosorontioClearviewSpringwaterBond HeadThorntonLorettoRosemontAlconaLefroyStroudBaxter
The PHD Plumbing crew and service trucks
Stocked for well work — switches, tanks and pumps ride with the truck.
FAQ

Pressure questions, answered straight

What pressure should my well water be at?
Most homes run a 40/60 psi switch: the pump starts at 40 and stops at 60. Some older systems are 30/50. Your pressure tank’s air pre-charge should sit about 2 psi below the cut-in, so 38 psi on a 40/60 system, measured with the tank drained of water.
Why does my pump turn on and off so quickly?
That’s short cycling, and the cause is nearly always the pressure tank rather than the pump. When the tank loses its air cushion, there’s no stored water left, so the pump has to start every time you open a tap.
Is short cycling really damaging?
Yes. A pump motor’s wear is in its starts, not its running hours. A short-cycling system can put a pump through thousands of extra starts a week, which is how a 12-year pump dies at four. Fixing a tank problem regularly prevents a much larger pump bill.
Can you just turn my pressure up?
Sometimes, and we will if that’s genuinely the issue — a switch set at 30/50 in a two-storey house feels weak upstairs. But turning up a switch on a tired pump or a dead tank just hides the fault for a few weeks, so we test first.
How do I check the tank pre-charge myself?
Shut off the pump breaker, open a tap to drain the tank, then read the Schrader valve on top of the tank with a tire gauge. If it reads near zero or spits water, the bladder has failed and the tank needs replacing.
Do you carry pressure switches and tanks on the truck?
Common switches, gauges and fittings, yes — most pressure calls are finished in one visit. Tanks come in several sizes, so we confirm the right one on site.
What does it cost to get someone out?
Diagnosis is free — finding the fault costs you nothing. There is a $45 service call on weekday visits. Evenings, nights and weekends carry a higher call-out rate, and you’ll be told that number when you book, not after. Once we know what’s wrong you get one flat price for the repair, and nothing starts until you approve it.
What does the 10-year warranty cover?
Major parts are warrantied for 10 years for customers on our maintenance program — keeping the system serviced is what makes that coverage possible, so the program is a condition of it. Equipment also carries its manufacturer’s warranty. Ask us what the program includes and what it costs before you decide.

Get your actual numbers.

One visit tells you what your system is running at and what it should be.

705-627-5725
Call now

Free diagnosis · upfront pricing · 24/7 emergency

24/7 well serviceFree diagnosis · upfront price
Call now
Call Now